Price Range: From $81 each

Product Return: Custom - No Returns

Usual Processing: Est. 10-13 Weeks Non Cancelable

Ship: Harahan, LA

Warranty: 3 year mfg. warranty

American Aluminum Low Profile Z Blade Decorative Bermuda/Bahama Style Window Shutter.

• American Bahama shutters 48" wide or over will have one vertical mullion (96" and over will need two vert. mullions, etc.).
• Low Profile Decorative Louver "Z" Blade: 2.208" wide, set at 25 degree angle, with 44% air flow rating.
• HINGE OPTIONS: Wall mount, 1" Buildout or ceiling mount top hinge available as option at no extra charge and is the same color as the shutter. Screws to attach the hinge to the wall are not included.
• Aluminum adjustable holdout arms, available option at no extra charge. Screws to attach are not included.
• Shutter holdout arms can be specified in either Mill Finish or can be the same color as the shutter.
• Optional slide lock pins to hold shutter closed are available.
• American Decorative aluminum louver shutters features a durable powder coat finish.
• These are quality heavy duty aluminum shutters for decorative purposes and not hurricane rated. However we do carry rated shutters also.
• Finishes are either textured or smooth depending on the color chosen.
• Shipping will be quoted during the checkout or you can use the calculator in the shopping cart.

BAHAMA MEASUREMENT GUIDELINES:


SHUTTER HEIGHT: Functional Aluminum Bahama Continuous Hinge Shown is optional and is included in the height you choose for your shutter. Please take this into consideration when determining what height to order your shutters.
The standard wall mount hinge extends approximately 2" above the height of your shutters and is included in the shutter height you choose.

The ceiling mount hinge extends approximately 1/2 inch above the shutter and is included in the height you choose for your shutter.

When deciding what height to order your shutters you should determine the point above your window you want the shutter to reach at the top of the hinge. If you do not have any obstructions above the window we would recommend you measure up approximately 2” to 3” above the top of your window. If you have a flat window trim above the window we would usually measure from the top of your window trim down to the point you want the bottom of the shutter and order your shutters that height. Please NOTE that these are general recommendations and will not suit every situation, please use your common sense and order appropriately but make sure the shutter extends above the window enough to mount the hinge into a solid surface.



BAHAMA WIDTH: If you are using holdout arms on your shutters the width you choose should be wide enough so the arms will be installed on the window trim or siding. That means you will need to add some amount to the shutter width beyond the actual window size. In general if you are going to use arms installed behind the shutter you should add at least 3” to the window width, that will give you 1.5” past the window on each side to install the arm bracket on the house or trim. If you are going to use arms mounted at the side of the shutter (which would generally be my choice) you could probably get by adding a little less.


Aluminum Bahama Shutter Install Guidlines:


Mounting screws are not included, choose screws based on your specific project such as corrosion-resistant self-drilling screws (e.g., #14 screws used for metal roofing) or fasteners for brick installations (e.g., ¼-inch Tapcon concrete anchors).
1. Mark the first two screw holes 1.5 inches from either end of the hinge header.
2. Space the remaining holes equally along the length of the hinge at approximately 10” to 12” apart.
3. Drill each marked hole using a 9/32 inch drill bit or one slightly larger than your selected screw diameter.
4. Hold the shutter up to the window to determine the position you want to install the shutter. At this point take the shutter down and remove the wall portion of the hinge from the shutter by sliding it off of the shutter. You can then hold the hinge up to the wall and screw the hinge to the wall. At this point you can slide the shutter back onto the hinge that is screwed to the wall. You are now ready to install the hold out arms.
QUALITY: American Aluminum Z Blade Decorative Bahama Shutters are constructed to withstand most weather conditions, and our quality powder coat finish protects against humidity, sunlight, and harsh weather conditions.


Bahama Maintenance:
• Wash shutter and any tracks and arms with soapy water. Rinse with clean water twice yearly, or more often in coastal or high corrosion (salt) areas.
• Lubricate threaded areas on bolts, the hinges and fasteners with a dry silicone spray.


NOTE: American alumimum shutters are made for you after you place your order. Since they are custom and made to your specifications they cannot be returned or exchanged and the order cannot be canceled once the order is in production.