Continuous aluminum hinge is made with two parts which slide together for easy installation and is made out of aluminum. The Bahama hinge set is to be cut to whatever length needed. The Bermuda or Bahama shutter can be removed easily when not needed by sliding sideways. Paintable to match you shutters or other hardware. Illustrations provided below for measurements and installation.
NOTE: This drawing is shown with optional bahama stay bars and the shutters which are not included and must be purchased separately.
The male and female halves of the extruded aluminum Bahama hinge slide together for easy installation. The female half mounts on the wall and the male half is attached to the shutter. The hinge should be cut to the width of your shutter before installing. Screws are not included.
NOTE: Shutter Stays (holdout arms) are not included in this hinge set.
IMPORTANT NOTE: This hinge set is shipped as 48" set. If you need a smaller size you can cut this hinge to needed length. If you need wider than 48" you can purchase tow or more sets and butt them together.